This is a blog documenting my studio progress in my bachelor of creative technologies
Tuesday, 24 May 2011
Project 4 - More Research WITH SUCCESS
Today I did a lot of research in regards to the video that we are wanting to present. Not only that but we also talked about a physical presentation that we wanted to commit to. In regards to the video, we were mainly focussed on Max Msp. However, although this is a program mainly based on video processing, it is very limited in the fact that you cannot dig deep into your artistic imagination. Vertex shaders are also very hard to use and there is little about them on the internet, thus creating a texture on our video as I wanted would be almost impossible. Numerous posts were made on the cycling74 forum and not a single one was answered. And so I swayed more towards Processing itself. I was unsure of how to run videos in it but I found that there is a library that can be used to process live video feed to be altered. I wanted the pixels to jump out at you depending on how rough the texture is. I found a video on youtube that did exactly that. It turned the pixels into 3D squared that changed depending on color. The intensity could possibly be altered using the data we collect from our flex sensor. In regards to the physical side of things, we thought that we could construct a jenga tower that could be shaken by the data being read to symbolize an earthquake.
Project 4 Programming Progress
Today we started the day completely lost as to if we were even able to communicate Arduino with Max Msp. After doing a bit of research and digging deep into my prior electrical engineering knowledge i decided that using a voltage divider would be the best option to set up the 2 flex sensors. We walked up to surplus electronics, purchased a few components such as resistors and wired and headed back to AUT to piece it all together. Looking at a simple diagram I set up the breadboard and hooked it up to Toms Laptop to test it out (as my Max Msp has conveniently expired its trial version...) After consulting the teacher of Arduino we had an idea of how we would use the serial of Arduino to talk with Max Msp and send through the voltage values to be used as variables. We found an example in the program that could do exactly what we wanted called 'analogue read.'
After a bit of tinkering and an hour or two of staring blankly at the screen we finally had the variables printing on Max MSP.
Tuesday, 10 May 2011
Project 4
Today we were asked to do a kind of stop motion exercise similar to the bullet time effect in the matrix. We were asked to experiment with the idea of time and space. We chose to align our laptops in a semi circle to record in real time. I chose for my action a back flip. Because of limited amounts of laptops being available for our use we decided not to do the full circle and instead turn around and try imitate what we had done exactly the same but facing the other direction to give the 360 degree perspective.
I felt as though we could have improved a lot on our technique by using 1 camera to take a lot more photos in smaller increments to give a more matrix-like effect. However it was an interesting day experimenting with camera styles that we don't usually encounter. I wish we had more time to take advantage of the green screen more as none of us actually got around to putting a background behind our videos.
Sunday, 8 May 2011
Project 3 - The Wearable Interface
I wanted to show the audience that we all can fall victim to the same path as these men have taken. To do this I decided I would place 2 videos over the top of each other, one video playing a dark scene of crime and drugs and the other playing a video of innocent children. On top of this was played audio with children talking about their aspirations in life of what they wish to accomplish and achieve. The track ‘bad world’ was also played over the top to generate a mood of sadness which is also what our short film tried to convey. With the press of a button on a petal you could browse through different audio tracks and different contrasts of children and crime over the top of each other. In the end I did decide to use a small section of our film that was during the cemetery scene when the gangsters were discarding roses towards the grave of their loved one that was murdered. This was done because just like in the short film, it represents the loss of innocence, each rose discarded shows that the 4 gangsters have given up the last thing that gave them any sense of humanity.
Saturday, 9 April 2011
Reverse Cinema
Immediately after getting our assignment we all decided as a group, before doing any conceptual work, we would all watch our favorite mafia/mobster movies. I though this would be a good idea because it would give us inspiration of the kind of camera techniques used. After watching my favorite movie snatch I knew that we should somehow incorporate a stop start motion that this movie had adopted. It gives the impression of a ruthless and untamed atmosphere which i believe is vital to what we want to portay within our mafia short film. Not only did we watch snatch but in my spare time i watched lock stock and two smoking barrels, another classic and also a personal favorite of my own. I loved the gritty nature of the film as it showed humanity at its worst. However the atmosphere of all these English films is very modern, loud and fast which is not what I want our final film to look like. I also watched sin city at home, and from this movie I had the idea to use its color filter. All the environment colors are washed out and dismal while particular colors are emphasized. Since red riding hood was the short story we were focusing on, it would be a brilliant idea to use this technique to use the color red as symbolism within our short film to enhance the idea of innocence.Since nothing was getting done after watching our movies I decided to kick start the project by going to my local cemetery and filming some footage in order to show the group the idea I had in my head for the introduction of the short film. I put the footage together on adobe premier and thus, I was unanimously decided by the group to be the editor and soon to be many other rolls. This was exactly what the group needed as it gave us a starting point and from there we began to plan where and how we were going to record.
Our story is about a group of mafia men called 'the wolf pack.' After a little girl is killed they gather to her funeral to mourn her death. Upon finding out the address of the man who killed her at a poker game they head out in seek of revenge. In the haste of the act they mistakenly shoot someone inside the hotel apartment where the man was apparently staying. Ironically it turns out that they shoot the little girl who was suppose to be dead. It turns out that an ex wolf pack member had faked her kidnapping and death in order to protect her from the gang life that she was exposed to. This conveyed the strong messages of red riding hood as it shows that innocence has been robbed from her. It also conveys the themes of rebirth as the men realize that the lifestyle they lead has lead them to rock bottom and evidently the death of someone they loved.
After much deliberation we finally put together a very brief story line that related to red riding hood in a very modern perspective. On our first day of filming we went to the graveyard on Symonds street to record our opening scenes. We decided to out and film regardless of having virtually no preparation as most of the group had a tight schedule they had to meet. Because it was so hard to find actors to act on particular days we decided that we ourselves would act in our film. However things began to fall into place as we developed the film over time. I felt as if we could have done a much better job of the film if we had taken the time to re shoot some scenes but since our main character was going overseas we were unable to capture what we truly wished to convey to the audience.

On our second session of filming we went to Reuben's house to record the poker scene as he had a gambling table that we could use. We used a separate camera than the one we used to the cemetery that had a separate megapixel value, and once again, because the Yogi (our actor) was leaving the country the next day it made re shooting very hard. We also shot the kidnapping scene and the murder scene that same night. However, the person who was in charge of bringing the storyboard forgot to bring it so we once again, had to re invent what we had created during studio to the best of our ability. All in all, it was very hard to edit because of the contrasting camera megapixels that we used. However i tried to use this to my advantage by exploring new and interesting layouts within adobe premier to mask how pixelated it was. An example of this was how I used smaller boxes to compress the resolution so it wasn't so obvious but also tried to maintain an artistic perspective. Overall, i think the idea was great, the story was great, but we should have used our storyboard to help convey the meaning behind what we were showing. We didnt want to create some cliche shortfilm to entertain, we also wanted to convey a message to the audience and have an impact.
Saturday, 19 March 2011
I found this exercise to be very enlightening and eye opening as to the possibilities of what can be accomplished when given a particular task in BCT. There were robots that conveyed art through light, color, and yes even by drawing in rice and hair gel. During research at home i discovered the idea to convey our art style by using a game of some sort. This evidently was carried out by emulating the movements of the game "Snake."Our entire class were given the same task and yet so many different ideas were generated showing a never seen before connection between art and robotics. Most popular of which throughout groups was themed by disco. (see 2nd video). I thought was very creative, but at the same time it didn't leave a mark that could be referred back to. It required camera effects in order to create the image instead of the robot actually drawing the image. Another robot that was made poured paint from an altitude onto paper using a 3 motor system that calculated what paint to mix including red yellow and blue. This i felt was a great idea because it would always produce abstract art differently every time determined on motion sensing. However i felt the 'artistic reward' should go towards the robot that responded to sound and recorded its own movements to show the user where it had been commanded by banging on the box. I think this because this robot used the best method of dispersing its paint. It was organised and actually could have been mistaken for true gallery art!
How i felt about my own project?
At the very beginning of the assignment we interpreted the brief as instructing us to draw an image only on the confines of paper. Because of this we were extremely limited in the variety of ideas that we produced. Our kit was also very limited with parts and components from the start so we were forced to simplify our robot and focus more on the programming side involving Mindstorms NXT. We decided that instead of creating an image or drawing based solely on interaction, we would use it to our advantage and incorporate a game into our design. This brought about a purpose for the robot and allowed us to explore more variables. Late in our production we were forced to change most of our ideas due to the fact that we were unable to convert what we had on paper into a usable program due to our limited knowledge of the language of the program. Instead we devised different methods to work around the problem. For example, at this stage in design I had the idea for the robot to play touch rugby, where u had to avoid obstacles and get to the other side of the playing field before being touched 5 times. This despite an immense amount of tutorial research was unable to be done so I decided that if we couldn't create an “end” to the game then we would have to work with a looping system. And it was from this that I was inspired to create a game similar to the game of “snake” on a mobile phone. We were now able to change the direction of the robot (acting as the snake) by simply touching the sensor. This also allowed us to interact much more than originally planned at the same time eliminating many unwanted variables that might ruin the game. Not only this, but the robot was able to interact with its own environment by detecting color. It was done by using many loops to compare different colors at each stop/start movement of the robot. This was a great accomplishment because it meant that we could introduce different environments and it would never draw the same thing, it would always be different. However in our last presentation we only experimented with circles regretfully. Not only that but it was designed to be used for much larger scale use instead of just A1 paper, this is because the aim of the robot was for people to steer it around the room using the touch sensor. I feel as though we did not convey our true intentions as much as we would have wanted to. Reflected back at our thought processes as a group I also feel as though we should have experimented with variations of different art styles. In a sense our thinking pattern was largely tunnel vision towards set goals of creating a game and not art. I feel if we had experimented with paint for example we would have created images that were more artistic. Yes, our 3 images were individual but they were also generic and visually similar due to the fact we only used 2 different colors, although the messiness of the blue pen did contrast well with the geometry of the circles. Overall I am satisfied in what we created, given more time I know that I would be able to unlock its true potential and explore a lot more in depth on the decorative side of this project.
Subscribe to:
Posts (Atom)








